 |
Advice and data provided on these pages is without warranty, expressed or implied.
Many of the modifications explained here may not be legal in your area, please check
local laws and ordinances before attempting. Always wear safety equipment.
| Created By: |
Frank Mitchell |
Category: |
Maintenance
Engine |
| Date Posted: |
02-17-02 |
Views: |
2994 |
| Title: |
Belt sizes for underdrive pulleys |
| Article: |
BELT SIZES FOR UNDERDRIVE PULLEYS
These are the size belts required when installing an underdrive pulley
1.8L with A/C use a 59K6 belt, 1.8L without A/C use a 455K6 belt
1.6L, turbo and n/a, uses with A/C uses 41K6, without A/C use a 37K6
1.6L, turbo and n/a, the belt for the alternator will be a 27K4, this
belt is the same if you have A/C or not.
Thanks to Sam Avendano of the IsuSoul Car club in Canada for supplying this bit of information.
|
|
