|
Advice and data provided on these pages is without warranty, expressed or implied.
Many of the modifications explained here may not be legal in your area, please check
local laws and ordinances before attempting. Always wear safety equipment.
| Created By: |
Frank Mitchell |
Category: |
Engine Maintenance |
| Date Posted: |
02-14-02 |
Views: |
6668 |
| Title: |
Fluids, Capacities, Firing Order and Other Stuff |
| Article: |
Recommended Lubricants and Fluids
Fuel - Unleaded gasoline, 87octane or higher
Automatic transaxle fluid type - DEXRON II automatic transmission fluid
Manual transaxle fluid - GM transmission lubricant #12345349 is the GM recommended type BUT Red Line Brand MTF is a better choice, followed by Mobil 1 5W-30 weight motor oil and then standard 5W-30 motor oil(Isuzu recommended fluid)
Brake fluid type - DOT 3 brake fluid
Power steering fluid - GM power steering fluid #10552884 or equivalent
Capacities *
Engine oil (including filter) 10-W30 recommended
SOHC engine - 3.6 qts
DOHC engine - 4.6 qts
Coolant - 7 qts
Transaxle Automatic (drain and refill) - 3.2 qts
Transaxle Manual - 2 qts
Firing order - 1 - 3 - 4 - 2
Cylinder # 1 is to the left when viewing the engine from the front of the car. They are, left to right, 1 - 2 - 3 - 4. Looking from the side of the distributor... starting from the top right counter clockwise it's 1 - 3 - 4 - 2
Clutch free play - 5/8 inch (measured at the pedal)
*All capacities are approximate. Add as necessary to bring to appropriate level.
|
|